{"id":475,"date":"2021-09-13T19:46:41","date_gmt":"2021-09-13T19:46:41","guid":{"rendered":"https:\/\/www.outdoorsniagara.com\/?p=475"},"modified":"2021-09-13T21:15:07","modified_gmt":"2021-09-13T21:15:07","slug":"how-to-make-a-paracord-fishing-rod-grip","status":"publish","type":"post","link":"https:\/\/www.outdoorsniagara.com\/how-to-make-a-paracord-fishing-rod-grip\/","title":{"rendered":"How To Make A Paracord Fishing Rod Grip"},"content":{"rendered":"
Paracord is very popular and has many uses. So it is not surprising that people want to use paracord to make a grip for their fishing rods.<\/p>\n
Inside this post, we go over how to do just that, and we give you a little more information that we think might be essential.<\/p>\n
Contents<\/p>
When you customize a fishing rod, be sure to consider the original handle or grip, the action of the rod, and how you intend to use the rod.<\/p>\n
It is not recommended that you wrap a paracord grip past the factory section where the original grip begins and ends.<\/p>\n
The reason why is too much paracord wrapping can distort the action of the fishing pole.<\/p>\n
Another critical reason not to go “overboard” is that cord grips dampen the feeling you get from a rod.<\/p>\n
In short, you may not feel small bites, which can mean a lost opportunity to battle big fish.<\/p>\n
The rod’s action is a measurement of how much force it takes to bend the rod, and you also want to consider how the rod bends.<\/p>\n
Fast action rods typically bend at the tip, while medium and slow rods tend to bend at the center point.<\/p>\n
All of these little bits of information are essential if you want the rod to function as designed.<\/p>\n
Cording makes a handy grip for fishing rods. It is not the best grip material, but it has pros and cons. One of the best features of cording, whether you paracord or another type of cording, is that it provides a good grip when your hands are wet or slimy from bait or fish.<\/p>\n
The downside to cord grips is that they dampen the feeling you would otherwise feel while fishing.<\/p>\n
There are several parts involved in creating a paracord grip. We will go over the entire material list next. One last consideration before you get started is comfort.<\/p>\n
Be sure to consider the diameter of the rod’s handle and the thickness of the paracord.<\/p>\n
You don’t want to create a grip that is too thick and uncomfortable for your hands.<\/p>\n
You can test the comfort of your design by using a small piece of duct tape to fasten the paracord to the rod and then wrap the cord tightly around the rod.<\/p>\n
Secure the end piece with another piece of tape. Grip the rod and see how comfortable it is in your hand.<\/p>\n
A cord can be abrasive, so be sure to consider all the actions of casting, gripping, reeling, etc., as part of this process.<\/p>\n
An uncomfortable grip will cause blisters and decrease the fun of fishing.<\/p>\n
You will need a few items before you get started. Here is the list of things you will need to make a sturdy and well-crafted paracord grip for your fishing rod.<\/p>\n